View MAAM02350_4649232.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MAAM02350
Wide Band GaAs MMIC Amplifier 0.2 - 3.0 GHz
Features
* * * * High Gain: 19 dB Typical Output Power: +14 dBm Typical Noise Figure: 3.7 dB Typical RoHS* Compliant Rev. V4
Pad Layout
Description
M/A-COM's MAAM02350 is a wide band, MMIC amplifier. It includes two integrated gain stages and employs resistive feedback to obtain flat gain and a good, 50 ohm input, and output impedance match over a very wide bandwidth. The MAAM02350 operates from a single +6 V supply. It is fully monolithic. The MAAM02350 functions well as a generic IF, driver or buffer amplifier where high gain, low noise figure, excellent linearity and low power consumption are important. Because of its wide bandwidth, the MAAM02350 can be used in numerous commercial and government system applications, such as wireless communications, EW and radar. The MAAM02350 is manufactured in-house using a reliable, 0.5-micron, GaAs MESFET process. This product is 100% RF tested to ensure compliance to performance specifications.
Die Size--Inches (mm)
0.044 x 0.032 x 0.004 (1.140 x 0.820 x 0.102)
Outline Drawing
Absolute Maximum Ratings 1,2
Parameter VDD Input Power Channel Temperature
3
Absolute Maximum +7 V +20 dBm +150C -55C to +100C -65C to +150C
Operating Temperature Storage Temperature
1. Exceeding any one or combination of these limits may cause permanent damage to this device. 2. M/A-COM does not recommend sustained operation near these survivability limits. 3. Typical thermal resistance (jc) = +80C/W.
Ordering Information 4,5
Part Number MAAM02350 Package DIE
4. Reference Application Note M538 for lead-free solder reflow recommendations. 5. Die quantity varies.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MAAM02350
Wide Band GaAs MMIC Amplifier 0.2 - 3.0 GHz
Electrical Specifications: TA = 25C, VDD = +6 V, Z0 = 50
Parameter Gain Gain Flatness Noise Figure Input VSWR Output VSWR Output 1 dB Compression OIP3 Reverse Isolation Bias Current Test Conditions 0.2 - 3.0 GHz, PIN = -30 dBm 0.2 - 3.0 GHz, PIN = -30 dBm 0.2 - 3.0 GHz 0.2 - 3.0 GHz, PIN = -30 dBm 0.2 - 3.0 GHz, PIN = -30 dBm 0.2 - 3.0 GHz 0.2 - 3.0 GHz, PIN = -30 dBm 0.2 - 3.0 GHz, PIN = -30 dBm -- Units dB dB dB Ratio Ratio dBm dBm dB mA Min. 17 -- -- -- -- -- -- -- -- Typ. 19 0.5 3.7 1.8:1 1.5:1 +14 24 35 65 Max. -- -- 4.1 -- -- -- -- -- 100
Rev. V4
Schematic
Typical Bias Configuration
Handling Procedures
Please observe the following precautions to avoid damage:
6. Self-bias operation is obtained by connecting +6 volts to both VDD and VDD' pads, grounding pad S1, and connecting pads GND1 and GND2 to separate bypass 500 pF MOS capacitors.
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices.
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MAAM02350
Wide Band GaAs MMIC Amplifier 0.2 - 3.0 GHz
Typical Performance @ +25C
Gain
25
Rev. V4
VSWR
3.5
3.0
20
Input VSWR Output VSWR
2.5
15
2.0
10
1.5
5 0 1 2 3 4 5
1.0 0 1 2 3 4 5
Frequency (GHz)
Frequency (GHz)
Noise Figure
5
4
3
2
1 0 1 2 3 4 5
Frequency (GHz)
3
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MAAM02350
Wide Band GaAs MMIC Amplifier 0.2 - 3.0 GHz
Handling
Permanent damage to the MAAM02350 may occur if the following precautions are not adhered to: A. Cleanliness - The MAAM02350 should be handled in a clean environment. Do not attempt to clean assembly after the MAAM02350 is installed. B. Static Sensitivity - All die handling equipment and personnel should comply with DOD-STD1686 Class 1. C. Transients - Avoid instrument and power supply transients while bias is connected to the MAAM02350. Use shielded signal and bias cables to minimize inductive pick-up. D. General Handling - DO NOT touch the surface of the die. It is recommended that the MAAM02350 die be handled along the long side with a sharp pair of tweezers. Rev. V4
Bonding
A. Ball or wedge bond with 1.0 mil diameter gold wire or 3.0 mil x 0.5 mil ribbon. Thermosonic bonding with a nominal stage temperature of 150C and a ball bonding force of 40 to 50 grams or wedge bonding force of 18 to 22 grams is recommended. Ultrasonic energy and time should be adjusted to the minimum levels necessary to achieve reliable bonds. B. Bonds should be started on the die and terminated on the package. RF bonds should be as short as possible; at least three and no more than four bond wires from ground pads to package are recommended. C. Bonding pads are 4.0 x 4.0 mils.
Mounting
The MAAM02350 is back-metallized with Pd/Ni/Au (100/1,000/30,000A) metallization. It can be diemounted using Au/Sn eutectic performs or a thermally and electrically conductive epoxy. The attachment surface should be clean and flat. Eutectic Die Attach: A. An 80/20 Au/Sn perform is recommended with a work surface temperature of approximately 225C and a tool temperature of 265C. When hot 95/5 nitrogen/hydrogen gas is applied, solder temperature should be approximately 290C. B. DO NOT expose the MAAM02350 to a temperature greater than 320C for more than 20 seconds. No more than 3 seconds of scrubbing should be required for attachment. Epoxy Die Attach: A. Apply a minimum amount of epoxy and place the MAAM02350 into position. A thin epoxy fillet should be visible around the perimeter of the die. B. Cure epoxy per manufacturer's recommended schedule.
4
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.

▲Up To Search▲

Price & Availability of MAAM02350

	To Download MAAM02350 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .